[GiDlist] Mesh creation

GiDList Archive 2013 - 2005
1

Dear all,

I have a doubt about the creation of a mesh for a problem attached.
I have two different materials: 1 and 2.
The material 2 is inside a ring with a thickness of 0.02 m.
Outside and inside the ring there is a material 1.
I need of a structured mesh (more fine near the ring and coarse outwards) with quadratic elements (possibly quadrilater).
How can I make it?
Thank you very much.


Agnese Murianni
D’Appolonia S.p.A.
Via Liri, 27 - 16145 Genova - Italy

-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130607/fb34375a/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed…
Name: Horizontal plan.png
Type: image/png
Size: 5201 bytes
Desc: Horizontal plan.png
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130607/fb34375a/attachment.png

2

Dear Agnese,



You can generate different kinds of structured mesh: 4-sided (for surfaces
on which ‘4 sides’ can be identified), and center structured. Both of them
are assignable from the Mesh-Structured menu.



For hte inner part of the ring (circle) you can use the center structured,
and for the ring and the outer part you should split your geometry in pieces
of 4 sides.



In both cases you can concentrate elements in given regions. You can find
this information in the help menu:









Regards,



ABEL


\

Abel Coll Sans - Civil Engineer

CIMNE - International Center for Numerical Methods in Engineering

Ofice c-2, C1 building - Campus Nord UPC

Gran Capità s/n, 08034 Barcelona

T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17




De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Agnese Murianni
Enviado el: viernes, 07 de junio de 2013 9:17
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Mesh creation



Dear all,



I have a doubt about the creation of a mesh for a problem attached.

I have two different materials: 1 and 2.

The material 2 is inside a ring with a thickness of 0.02 m.

Outside and inside the ring there is a material 1.

I need of a structured mesh (more fine near the ring and coarse outwards)
with quadratic elements (possibly quadrilater).

How can I make it?

Thank you very much.





Agnese Murianni

D’Appolonia S.p.A.

Via Liri, 27 – 16145 Genova – Italy

( +39 010 3628148 6 +39 010 3621078

URL: http://www.dappolonia.it/ http://www.dappolonia.it



-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130610/36ce7f6d/attachment-0001.htm
-------------- next part --------------
A non-text attachment was scrubbed…
Name: not available
Type: image/png
Size: 119542 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130610/36ce7f6d/attachment-0001.png